Solar buyback rates are not one national number. Your savings depend on your utility’s export rules, retail rate structure, fees, system limits, and the timing of your annual true-up. This guide shows how to review those inputs, compare net metering with other solar credit arrangements, and build a repeatable estimate before accepting a solar proposal or adding a battery.
Overview
When solar panels produce more electricity than a home uses, the excess may be sent to the grid. The utility then applies a credit, payment, or other form of compensation according to its tariff. That arrangement is often described as net metering, net billing, or a solar export program, but the details vary by state, utility, customer class, interconnection date, and system size.
A useful solar bill-savings estimate separates three questions:
- How much electricity will the system produce?
- How much of that production will the home use directly?
- How will the utility value electricity exported to the grid?
Directly used solar electricity usually avoids buying that electricity from the utility. Exported electricity may receive a different credit. Fixed service charges, demand charges, minimum bills, time-of-use pricing, and true-up rules can further change the result. A proposal that shows only annual panel production is therefore incomplete.
State and utility comparison worksheet
Use this table as a comparison framework rather than a list of guaranteed rates. The correct answer comes from the tariff and interconnection documents that apply to your address.
| Location or account | Export arrangement to verify | Key questions |
|---|---|---|
| Your state | State incentive and interconnection rules | Are there program caps, system-size limits, application deadlines, or customer eligibility rules? |
| Your utility | Net metering, net billing, or avoided-cost compensation | Is exported energy credited at a retail-linked rate, a separate export rate, or another formula? |
| Your rate plan | Flat, tiered, or time-of-use pricing | Are evening and daytime prices different, and which rate applies to avoided consumption? |
| Your interconnection agreement | Approved system size and operating terms | Are there export limits, a compensation cap, or a requirement to change rate plans? |
| Your annual billing cycle | Monthly crediting and true-up process | Do unused credits roll forward, expire, or settle at a different value? |
How to estimate
Start with twelve months of electric bills if possible. Record monthly kilowatt-hours used, total charges, rate-plan name, fixed fees, and any seasonal or time-of-use details. Then obtain the proposed system’s expected monthly production rather than relying only on its annual total.
For each month, use this basic structure:
Estimated monthly bill reduction = value of solar used at home + value of exported solar credits − remaining utility charges.
To estimate the first term, compare solar production with the home’s hourly or monthly consumption. Solar used during the day offsets electricity at the applicable retail price. For the export term, multiply estimated exported kilowatt-hours by the utility’s documented export-credit rate or formula. Do not automatically apply the retail rate to exports.
Then subtract charges that solar may not eliminate, such as customer fees, minimum bills, demand-related charges, or other tariff items. If the utility settles credits annually, model both the monthly bills and the final true-up instead of treating every credit as immediate cash savings.
For a quick annual estimate, you can use:
Annual savings ≈ self-consumed solar × avoided purchase rate + exported solar × export-credit rate − annual charges that remain.
This is a screening calculation, not a guarantee. A detailed model should use monthly or hourly production and consumption data, especially when the home has electric heating, an EV, a heat pump, or a battery.
Inputs and assumptions
Keep the inputs visible so you can update the estimate when a rate or proposal changes.
- Electricity use: Use actual bills and note unusual months, vacant periods, and planned load changes.
- Solar production: Request the monthly production estimate, system size, shading assumptions, and expected degradation treatment.
- Self-consumption: Estimate how much production occurs while the home is using electricity. A battery or load shifting can change this share.
- Export compensation: Confirm the current tariff, whether the rate changes by time of day, and whether it is subject to a cap or adjustment.
- Billing structure: Include fixed charges, minimum bills, demand charges, tier thresholds, and time-of-use periods.
- True-up terms: Record the settlement date, credit rollover rules, and treatment of unused credits.
- Interconnection limits: Check whether the utility restricts export or requires equipment that limits system output.
Do not treat a solar tax credit or state rebate as a substitute for bill modeling. Those incentives can affect the project’s upfront cost, while buyback rules affect operating savings. Review both separately. For broader quote comparisons, see our solar quote comparison template. If financing is involved, compare total repayment and dealer fees as well as the projected bill reduction using this financing guide.
Worked examples
Example 1: Higher daytime use. Assume a home produces 900 kilowatt-hours in a month and uses 600 kilowatt-hours during solar-producing hours. The home directly uses 600 kilowatt-hours, while 300 kilowatt-hours are exported. The estimate should value the 600 directly used kilowatt-hours at the applicable avoided purchase rate and value the 300 exported kilowatt-hours under the utility’s export rule. The result is not obtained by multiplying all 900 kilowatt-hours by one retail rate.
Example 2: Evening-heavy use. A second home produces the same 900 kilowatt-hours but uses only 300 kilowatt-hours while the panels are producing. It exports 600 kilowatt-hours and later buys electricity in the evening. Under a lower export-credit arrangement, this home may save less than the first even though annual production is identical. A battery, load shifting, or a different rate plan could change the comparison, but each option adds cost and should be modeled separately.
For either example, add the utility’s unavoidable monthly charges and apply the actual true-up process. Then compare the estimate with the installer’s savings forecast line by line.
When to recalculate
Revisit your solar bill estimate before signing a contract, when the utility proposes a rate-plan change, after receiving an interconnection approval, and whenever your annual true-up approaches. Recalculate after adding an EV, heat pump, electric water heater, or battery, because these changes can alter both self-consumption and peak usage.
Also check the model when your utility updates export rates, monthly fees, compensation caps, or time-of-use periods. State incentive rules and solar rebates may change independently of utility billing rules, so verify each category separately. At minimum, save a copy of the tariff, rate sheet, interconnection agreement, and proposal used in your calculation.
Your next step is practical: collect twelve bills, identify the current rate plan, request the utility’s export terms in writing, and ask each installer to show monthly production, self-consumption, exports, remaining charges, and true-up treatment. If the answers use different assumptions, normalize them before comparing offers. That process will not predict every future bill, but it will reveal whether a projected saving is based on your utility’s actual rules or on a generic solar estimate.